Gun & Prepping News #100

Some links that may be of interest: 

• "Mexico’s Government Funds Gun Grabbing Group"--Battleswarm Blog. Noting that "[t]he organization, Global Action on Gun Violence, has documented connections to Democratic lawmakers. It featured Rep. Dan Goldman in a gun-trafficking discussion⁠ promoted in its May and June 2025 newsletters and endorsed legislation backed by prominent Senate Democrats."
• "Evaluation of Defense Shooting Skills"--The Tactical Wire.  Rich Grassi explains:

    If your only assessment is the state qual course and you do that 1-to-4 times a year, does that really make you qualified? It does check a box, but it’s a minimum standard. The scoring area is vastly larger than it should be, the time you’re allowed is too long and, on the whole, judgement and discretion are never evaluated. 

    So how would a different shooting course help? 

    It’s an attempt to measure basic needed skills with a time constraint as well as allowing the instructor to evaluate gun handling – a critical aspect of the job. 

    The 5x5 classifier can be downloaded as a pdf here. It doesn’t have to be the IDPA 5x5 classifier, that’s just an example. 

• "Practice on the Indoor Range"--The Shooting Wire. The author goes over what he did when he wasn't able to use his regular outdoor range:

    The first trip saw use of the Ruger Mark IV Target; 5.5” bull barrel, metallic sights, the rear adjustable for elevation and windage. The gun has Hogue, Inc. “G-Mascus Green” G10 stocks in place of the factory stocks. Otherwise, there are no modifications.

    The ammunition I selected, based on concerns about indoor ranges and lead ammunition, was CCI CLEAN-22.  While it’s geared more to prevent barrel fouling and making a suppressor easier to clean, I reasoned that it could be a bit more healthy than uncoated lead projectiles. 

    I’m still careful to make use of hand cleaning wipes that are made to remove contamination of this sort. 

    Using a B-8 repair center for each segment, I’d shoot a pair of stages right-handed, replace the target and shoot a pair left-handed. 

    When trying to learn a physical skill like shooting, it’s good to work “mirror image” to get back to being a complete duffer and to iron out bad habits. 

• "The 'Lost' Art of Revolver Reloading"--Guns Magazine. Brent Wheat not only gives detailed instructions on how to do speed reloads for revolvers, but also explains why to use the left hand to hold the revolver when doing so. The article also covers the different between speed reloads (i.e., when speed matters like in combat or competition and using speed loaders), tactical reloads (i.e., removing spent cartridges and replacing them from speed strips or loose rounds), and an administrative reload (when time is not a concern). Explaining why to use the left hand to hold the revolver:

    A revolver cylinder is a floppy thing when it isn’t locked into the frame. On a square range, with your feet planted and your hands working exactly as you command, it’s not much of a problem. But a defensive reload may happen while you’re moving, running, fighting or ‘merely’ trying to keep your balance on a loose, slippery or uneven surface. I can also guarantee you’ll be dealing with an adrenaline dump that might leave your hands shaking like a toy poodle on meth. Now you’ve got to line up a half-dozen fresh cartridges with a cylinder that is moving around at the end of your arm.

     You might be able to get a finger into the cylinder opening to stabilize it — or you might not, because keeping a semblance of a firing grip makes it awkward. Worse, the cylinder could even relatch itself while you’re trying to get everything lined up.

    This is also why the support-side reload was traditionally taught to police officers back in those days when we rode dinosaurs on patrol. It wasn’t because somebody decided it was the fashionable way to reload a revolver; instead, hard-won trial and error proved the technique provided a more stable platform for manipulating the gun under less-than-ideal circumstances.

• "Minimizing Defensive Shotgun Recoil"--Shoot-On.  The tips include (i) using reduced recoil rounds (although the author specifically recommends against using mini-shells); (ii) using a stock that properly fits you and has a recoil pad; (iii) use a gas-operated shotgun; and (iv) adding a recoil reduction system to your stock.
• Going from something with heavy recoil with something quite a bit less: "The Defensive .32 ACP – The Ammo"--The Truth About Guns. A couple tips. First, the author advises avoiding hollow-point ammunition for a couple reasons: (i) if the bullet expands, it will slow it down enough that you lose too much penetration; and (ii) the shorter overall length makes it more likely you will experience "rim lock". Second, he recommends sticking to European ammunition, explaining:

    The American SAAMI standard for .32 ACP specifies a maximum average pressure of 20,500 PSI. The European CIP standard is higher, at roughly 23,200 PSI. That doesn’t mean every European load is automatically hotter, but it does give European manufacturers more room to load the cartridge toward that higher pressure limit.

    If you’re using a European pistol designed for European .32 ACP, it might malfunction with the weaker American stuff. With that said, my various European-designed surplus .32s haven’t had any problems with American-spec .32 ACP from Remington or Aguila.  

    There is another reason I like the European-loaded .32 ACP. It has a much more aggressive bevel near the rim and a deep groove for the extractor. The aggressive bevel acts more like a ramp, helping prevent rimlock and improving extraction. 

• "The Shaw .350 Legend: A Custom AR With a Hometown Touch"--The Truth About Guns. An interesting build for an AR intended for deer hunting, including some product recommendations and using a wood butt stock and pistol grip.  
• "5.11 Tactical Double Pistol Case Review: Protecting Your Investment"--Gat Daily.  The author relates:

    ... It’s designed to carry two handguns along with spare magazines and accessories. The case is 8.75 inches high, 11 inches long, and 3.5 inches deep, which makes it big enough for full sized service pistols. It’s still relatively compact though and would fit inside a patrol bag, ruck or larger range bag. The case is made from 1050D nylon and is fully padded to help protect your firearms during transport.

    Each pistol has its own zippered compartment, and there are three elastic magazine loops on the outside of each compartment. 5.11 uses lockable YKK zippers that open on three sides so the case lays flat on the shooting bench, making it easy to get to your gear. Reinforced grab handles are provided for carry There’s also a name tape panel on the outside, although its a smooth strip so I don’t really know how that works. Maybe write on it with a paint pen? The double pistol case is available in gray or black and has an MSRP of only $40. It’s on sale for $30 on 5.11’s site at the time I’m writing this. 

• "How to Disappear | Modern Escape & Evasion"--Bone Tactical.  He has fifteen (15) rules or tips for disappearing. The first two of these:

    First, assess your situation. Who are you getting away from—and why? Is it an abusive ex, online harassment, a business rebrand, or you just need a hard reset? Rank the threat: capability, reach, motivation, resources, and timeline. If it’s criminal danger, consider involving an attorney and—where appropriate—law enforcement or a victims’ advocate group. If it’s reputational heat, you’re playing a different game. Hopefully you won’t have multiple governments and organized crime after you like I did but stay tuned for the full playbook either way. Step one is to identify the problem before you try to solve it.

    Second, assess your resources and skills. Disappearing means transition, and transitions incur costs. Cash buys time. Skills buy options. Can you work with your hands? Build? Fix? Cook? Drive? Speak another language? The more value you can offer quietly and locally, the less you need to advertise yourself to survive. If money is tight, lean on skills. If skills are thin, learn fast.

He also has some warnings of how people mess this up, including:

Let’s talk about mistakes that get people burned. Breaking routine to chase fun in high-signal places. Oversharing because loneliness bites. Letting anger write checks your freedom can’t cash. Reconnecting with the same crowd that caused the problem. Slipping back into old usernames, old numbers, old patterns. The little compromises add up. Don’t feed the trail. 

• "How Long Can You Store Water? The Ultimate Safety Guide"--SHTF Preparedness. According to the author, "[c]ommercially bottled water, when sealed and kept in a cool, dark place, can remain safe almost indefinitely, while stored tap water is typically recommended to be rotated every 6 to 12 months." But the type of material for the storage container, the environment that the water is stored in, and handling (or mishandling) can effect how long it can be stored. For instance, if a water container is opened, there is always the risk of introducing contaminants which might encourage bacterial or algae growth. 
• "How to Stay Warm Indoors When the Power’s Out (& It’s Freezing Outside)"--More Than Just Surviving. Obviously, if you have alternate methods of heating, you will have an easier time than someone with more limited options. For instance, I have both a large kerosene heater and a carousel fireplace in a relatively small house, so I know from experience that I can keep my home comfortable even in the coldest of weather if, for some reason, the central heating fails. But what if you don't have these advantages? The primary point from the article is forget about trying to heat your entire residence, but instead focus on keeping a small area warm:

    If everybody’s in one room with the door closed and that room has got as many blankets, jackets, coats, pets, and whatever else you have at home to keep y’all as warm as possible, you’re going to have a lot easier of a time trying to stay warm by comparison to trying to heat multiple rooms.

    When it comes to sleeping, you don’t need to share a bed if you don’t want to, but if it’s not something you mind, why not? If you’re not into sharing a bed, drag extra mattresses or sofa cushions into your room of choice and have everyone sleep separately, but by being in the same room, you’re making sure none of your individual bodies’ heat production is going to waste – it’s helping to keep the room warm.

And if you don't have alternative heating methods, the author recommends that you go further and set up a tent in your "warm room" to further make it easier to keep an area warm. He also recommends staying in sub-zero rated sleeping bags and lining your tent with Mylar emergency blankets. He has some other tips, so be sure to read the whole thing. 

• Civilizational collapse: "You Don’t Realize How Far L.A. Has Fallen Until You Come Back"--PJ Media. An excerpt:

    I wrote in January about how, after moving out of L.A., where I lived for the first 30 years of my life, I've been able to see the city's decline more clearly whenever I go back for family visits or appointments every few months. I noted that "just as friends who haven’t seen your kids for a while recognize how much they’ve grown — much more than you, who are with them every day — whenever I drive into Los Angeles once every couple of months, the deterioration of the city is more evident. Many parts truly feel third-world."

    In that article, I focused on L.A.'s homelessness crisis, which can be seen under freeway underpasses, in city parks, and even in reports of homeless people getting into strangers' cars to sleep. This is not only visually disturbing but also anxiety-inducing. You never know how dangerous a homeless person might be, whether high on meth or suffering from severe mental illness. 

[snip]

    Comedian Bridget Phetasy, who recently returned to Los Angeles after years away, described a similar sensation to the one I feel upon returning: "It's like when you see someone and they've, you know, lost a lot of weight and they don't see it because they see themself every day and you see them and you're like, whoa. Right. That's how it feels."

    Phetasy used the word "unsettling" to describe "how much commercial real estate is empty." And she chose as an example a place where I spent many a happy day in both my childhood and young adulthood: Santa Monica's Third Street Promenade. The three pedestrian-only blocks were a favorite destination for so many in the '90s who wanted to catch a movie, grab dinner, shop, or watch street performers. 

    A California Post report earlier this year noted that the Promenade’s vacancy rate is now 25% and that the popularity of the destination began to decline because of the homelessness crisis, then fell further during COVID and the looting inspired by the “Summer of Love” following George Floyd’s death.