Some links that may be of interest:
- "The “99 Percent” Myth About Women and Their Guns"--The Truth About Guns. Debunking the myth that women's guns are used against them 99% of the time.
- Speaking of women and guns: "Top Concealed Carry Guns For Women"--Miss Tactical. The author does list 10 handguns to consider, but she also 10 pointers or suggestions for selecting a concealed handgun which are, frankly, generally applicable to most anyone trying to select their first (or second) defensive handgun (even if I don't agree with her blanket rejection of revolvers).
- "Straight Talk: Shooting the Double-Action Revolver"--Shooting Illustrated. From the article:
Lately, a thumbs-forward grip has become popular among handgun shooters. While a good choice for semi-automatics, it is a mistake where fast shooting with double-action revolvers is concerned. When we take hold of something with the intention of really hanging onto it, we don’t stick our thumbs out in the air, we roll them down to get the strongest grip. And a strong grip is an important aid to trigger management, particularly with defensive ammunition.
The trigger press itself should be one long, continuous movement until the shot breaks, and dry practice is a good way to develop this technique. The double-action revolver shooter can’t spend enough time on dry practice. The goal is to press the trigger until the action cycles and the gun snaps—without allowing the sights to move off target.
- "How To Wear A Belly Band Holster"--Phantom Tactics. Although the article's primary focus in on their own product, a lot of the information is going to be applicable to belly band holsters in general.
- "Concealed Carry: Pros & Cons of Ankle Carry"--Pew Pew Tactical. Some of the pros to ankle carry:
The most obvious pro, especially if you're using ankle carry to house a BUG, is that it allows you to have more than one gun.
Let's be real; guns fail sometimes. You don't want to deal with a malfunction in a dire situation. With ankle carry, just grab your spare and go from there!
The other advantage is it allows people who otherwise couldn't carry to do so.
If you're stuck adhering to a dress code at work, ankle carry likely accommodates your outfit in a better manner.
For instance, if you wear suits, dresses, skirts, or even scrubs, ankle carry allows you to continue to carry even though you don't have a belt.
(But always follow company policy in regards to whether you can carry on the property.)
If you happen to work a desk job that requires a lot of sitting, ankle carry might also feel more comfortable than strong side or AIWB. Plus, it's pretty easy to draw from a seated position.
- "Silencer 101: What’s the Best Suppressor Material for Me?"--Shooting News Weekly. A look at the applications and pros/cons of aluminum, stainless steel, titanium, and a couple exotic alloys.
- "Over-Pressured Ammo: 5 Dangerous Signs You Shouldn't Ignore"--Rifleman Magazine. Briefly, the signs are (i) a stiff bolt handle; (ii) flattened primers; (iii) extractor smears; (iv) loose primer pockets; and (v) case rings around the base of the cartridge.
- "AR-10 Origin Story"--The Armory Life.
- "The Truth About the AR-15 Carry Handle"--The Truth About Guns. A look at the rear sight/carry handle for the AR-15, with this final comment:
All that being said, a carrying handle attachment takes up a lot of rail space. If you have no interest in putting anything other than fixed sights on your AR, a carry handle is a great option. Otherwise, there are better alternatives.
There are plenty of high quality flip-up iron sights on the market that feature similar sight pictures and don’t take up your rail space. There are also compact fixed sights, like these, that have the same sight picture.
Unless you have a specific reason for needing the carry handle design, it’s just not as practical for most rifle owners these days. It may be a cool thing to have, but I can’t say I’d pay a lot of money for it.
- "PSA PA-15 Review: Is This Budget AR-15 Still Worth Buying?"--Ammo Land. It has everything you need to start out with other than sights and extra magazines. It seemed to run reliably and accurate enough for government work (i.e., 3 MOA) using cheap Tula steel cased .223. It would have been nice to see accuracy testing with better quality ammunition, though.
- Related: "PSA Sabre AR-15 Review: Testing PSA’s Duty-Grade Rifle"--Ammo Land. This is a better quality rifle but also costs almost twice as much. However, it ran reliably with a variety of ammo and was roughly 1 MOA in the testing.
- "The Best AR-15 Hunting Rounds for Hunting" by Richard Mann, Game & Fish Magazine. Mann discusses different calibers and loadings for different types of game, including these recommendations for medium sized game:
Though some hunters claim it’s not enough gun, the .223/5.56 will work for deer and feral hog hunting. Over the years, I’ve taken about two dozen deer with the .223 Remington, and it has worked marvelously. The key—as with any cartridge—is to choose the right bullet. The 62-grain Federal Fusion load, the 70-grain Nosler AccuBond load and the 75-grain Swift Scirocco load are all ideal. However, currently the .223/5.56 is only legal for deer hunting in 36 states. This caliber limitation also applies to other AR-15-compatible .22 centerfires.
I think the three best cartridges for medium-game applications are the 6mm ARC, 6.5 Grendel and .300 HAMR. You can view 6mm ARC and 6.5 Grendel as sort of light versions of the .243 Winchester and 6.5 Creedmoor. With both, bullets will weigh 130 grains or less, but their high ballistic coefficients allow them to retain velocity and energy well and shoot reasonably flat out to 300 yards.
- Related: ".350 Legend vs. .450 Bushmaster: Which Straight-Wall Deer Cartridge Is Best?"--Game & Fish Magazine.
- "A 10mm Glock and Serious Practice Saved My Life During This Grizzly Charge"--Outdoor Life. I suspect that the practice had more to do with his survival than the caliber of the firearm, because it turned on the fact he was able to draw and fire eight rounds--seven of which apparently struck the bear--in what was estimated to have been about 1.5 seconds based on distance from which the bear charged him and when it stopped its charge.
- "The CatGirl Cocktail Hour: How to Defeat A Main Battle Tank with New Garbage"--Anarchonomicon. The article begins with a lengthy discussion of why it is impractical (and dangerous) to make explosives and why the Molotov cocktail is ineffective against modern armored vehicles. The author then discusses thermite and why you probably won't be able to use it to melt through the hull of an armored vehicle. But that doesn't mean that it is useless:
The Tracks of a Tank are it’s Achilles heel. Here the 600 millimeters (60 cm, 2 feet) of effective armor the tank has are reduced down to mere 5-20 millimeter pins.
These pins are under extraordinary forces and pressures for the tank to move engine turns the drive sproket, and then ever wheel, contact surface, and the entire weight of the tank are all moved via tension on the track. Similar to the chain on a bike or motorcycle, but if the chain had to loop around the outside of the tire and be the contact surface of the tire in addition to the drive force.
Beyond this tanks have TWO treads and zero steering tire. The way tanks turn is by running one tread faster, and one tread slower… And sometimes they even turn in place by running one tread forward, and one tread backwards. Again modern tanks are 50 tons, and there is no inbuilt steering or angling to this. All 50 tons of the tank are turning based sheerly off the lateral tension formed between the two tracks pulling in different directions. RIPPING the contact surface of the tread out of it’s 50 ton contact with the hard ground.
All of this exerts unimaginable pressure on the small steel pins within the tread, which themselves need to be internally lubed and checked regularly lest they overheat and rip and the tank lose it tracks becoming as dead in the water as a bicycle that simultaneously lost it’s chain and tire at once.
So what happens to the treads when you flash-weld the pins, contact plates, and lube together… Whilst dumping newly formed molten hardening steel into the narrow space between where the pins and plates need to glide freely?
It rips itself apart.
The article then goes on to describe how to make an updated Molotov cocktail using thermite instead of gasoline, and has some other ideas of vulnerable points. It still seams pretty sketchy to me, and the author acknowledges this:
Likewise, the above hypothetical of a lone guerrilla faction, or cut off unit deprived of every heavy weapon and antitank tool, taking out a main battle-tank with nothing but garbage, a large number pop-cans, and a number of shredded tires… Isn’t realistic, but it highlights a lot of the dynamics.
In a normal engagement such a force would go after lighter armored vehicles or positions, or employ Meltatinis to augment or follow-up after employing regular explosive heavy weapons which they might have in smaller numbers, or limited capability.
But against lighter targets like Wheeled Vehicles or smaller infantry fighting vehicles… A very few Individual Meltatinis fired indirectly, employed in booby traps, or quickly thrown in ambush before running probably could cripple the vehicle.
- "DIY Radioactive Fallout Protection: Learn How To Survive!"--Firearm News. A detailed look at nuclear fallout, the thickness of different types of materials needed to shield against radiation, fallout shelters, and some extra equipment you might want to have to deal with fallout and radiation.
- "Condiments and Seasoning to Stockpile"--True Prepper. Whatever you do, make sure that you stockpile some black pepper and lots of salt. Salt can be used for much more than just seasoning so you probably should stockpile substantially more than what you think you will need. In any event, the article discusses why you will want seasonings and condiments, a list of recommended spices and seasonings to have on hand, tips on storage, and shelf life for various seasonings and condiments.
- "100-Year-Old Way to Filter Rainwater in a Barrel"--Prepper Journal. An excerpt:
A tattered, 4-inch thick, 1909 book I happily secured for $8 in a thrift store reveals, among umpteen-thousand other every-day skills, how to make homemade water filters. The instructions in “Household Discoveries and Mrs. Curtis’s Cookbook” are quite basic as everyone had a rain barrel back then and presumably knew how to filter rainwater. Now, 104 years later, I am thankful the authors had the foresight to preserve their knowledge for us and pointed out that rainwater collected in barrels from a roof is a necessity in some locations, but also is best for laundry and “often more wholesome for drinking purposes than hard water.”
- "Study Shows a Single Nuclear Blast Could Disable 99% of Satellites in a Matter of Days"--Science Alert. From the article:
In their study – which hasn't yet been peer-reviewed – the researchers simulated a 1-megaton nuclear explosion 500 kilometers above the South Atlantic, near a vast anomalous region where Earth's magnetic field is unusually weak.
The conditions there – in what's known as the South Atlantic Anomaly – would magnify the effects following the initial blast, trapping radioactive particles in pockets of space, through which satellites would keep traversing as they orbit Earth.
The same phenomenon unfolded after Starfish Prime.
"Electrons from radioactive fission-product decay became trapped in Earth's magnetic field, creating an artificial radiation belt that damaged satellites," the researchers, led by first author Zach Petersen, a UW astronomy-physics major student, explain in their paper.
"Unlike the prompt burst, a trapped belt repeatedly exposes spacecraft as they pass through it. A comparable event today would occur in a much more densely populated orbital environment."
And then some.
In the researchers' simulation – incorporating the 13,300 satellites active in low-Earth orbit as of January this year – a nuclear blast in the region of the South Atlantic Anomaly would disable 25 percent of the entire fleet after one day.
I'm surprised the Canucks haven't arrested Kulak.
ReplyDelete