The Realist: Ozark Trails Stocking-Stuffer Knives

This is a guest post by The Realist:

 "Ozark Trails Stocking-Stuffer Knives" by The Realist: 

Ozark Trail knife and multitool display at my local Walmart.

 Disclaimer: All products mentioned in this article were purchased by myself. I did not receive samples, evaluation models, or other compensation from any manufacturer or retailer. I have no formal relationship with any manufacturer or retailer mentioned in this article - I have only been an arms-length customer. All brand names and product names used in this review are the trade names, service marks, trademarks, or registered trademarks of their respective owners. This article reflects my unique circumstances and subjective opinions with regard to performance and other characteristics of the products being discussed. Your mileage may vary.

    My local Walmart finally got around to putting out their seasonal cardboard display loaded with inexpensive stocking-stuffer knives and multitools. I have been watching for several weeks for this display to be put out, and it finally appeared in their sporting goods department.

    However, these knives and multitools are no longer five dollars, they are now seven dollars ($6.97). And, they are now made in Vietnam, not China.

    The display has several varieties of pocket knives, including folding and fixed blade knives. Surprisingly, all of the knives have a plain edge - no partially serrated blades. There is only the one style of 12-in-1 multitool, looking very similar to prior years' offerings, with various paint treatments to the handles.

 Ozark Trail #6123 (top) and #6128 (bottom) pocket knives.

    I like simple locking blade pocket knives with a plain edge. My attention focused on two models in the display. First, the Ozark Trails #6123 whose packaging stated it had a "ball bearing open" for its pivot and a "rubberized handle." And second, the Ozark Trails #6128 whose blade style I liked better, and whose packaging also stated it had a "ball bearing open" for its pivot.

    Years ago, I purchased a CRKT knife with a ball bearing pivot. It opened smoothly with very little effort - perfect for one hand opening. The ball bearing pivot is the reason I was interested in these two Ozark Trails knives. Their ball bearing pivot is not as good as the one in the CRKT knife, but they open easier than a pocket knife without one.

    The blade is made of stainless steel, but there is no mention of the type or formulation. The blades come with a tolerable edge, but they could use some touching up. Both knives utilize a liner lock to lock the blade open while in use. Both knives come with an attached pocket clip, and it appears the pocket clip can be reversed on the #6128, but not the #6123. Both knives are 7.5 inches long when opened, and both knives have a 3.25 inch blade. The blades can be opened with one hand.

    The "rubberized handle" of the #6123 knife is indeed rubberized, with it being a thin sprayed-on rubbery coating like that found on many products. It should remain rubbery for several years before the coating deteriorates and becomes sticky.

    The fit and finish of both knives are good, but not perfect - much better than what I would normally expect for seven dollars. There are no burrs that could hang on clothing or cause injury while handling the knife. For both knives, when the blade is opened and locked, there is no wiggling - no side-to-side wiggle, and no looseness in the locking mechanism.

    For the past few years, I have been adding some of these inexpensive pocket knives to my backup and barter inventory. These knives are good enough in quality that I would not be worried about using one myself, putting one in a 72-hour kit, or giving one to someone else. These knives do not feel cheap - their look and feel is on par with the appearance and feel of more costly mass-market knives. In contrast, the Ozark Trails multitool also for sale in this seasonal knife display looks and feels cheap.