Gun & Prepping News #78

Some links that may be of interest:

• "INTERESTING STUDY FROM THE FBI" by Mossad Ayoob. Writing this past January 2026:

    ... A recent study of justifiable homicides by the FBI shows that nationwide, law-abiding armed citizens have been killing more violent criminals than the nation’s law enforcement community.

    Why? Because the citizen is right there when the deadly attack on him or her takes place, and the waiting time for lawful armed response is essentially zero. Remember, homicide is justifiable only in situations of immediate, otherwise unavoidable danger of death or grave bodily harm…meaning that every dead criminal is potentially one or more innocent lives saved.

He also links to the study. 

• "CMP Begins Selling Reclaimed 1903A3 Springfield Rifles"--The Firearm Blog. Due to the shortage of remaining serviceable rifles, the CMP has turned to using receivers from guns rendered unfirable (such as for drill rifles) and restored them to shooting condition. 

The CMP has done extensive testing to make sure the reclaimed actions are safe to use in these guns. Those original actions are mated to new production barrels and stocks to create shootable rifles once again. These 1903A3 Springfield rifles retail for $1050, plus $35 for shipping and handling. Purchasers cannot pick the manufacturer; these are strictly sent out “luck of the draw.”

• "Lake City Strike Enters Week Three—Here’s What It Means"--The Truth About Guns. Although the plant is primarily tasked to produce small arms ammunition for the military, Olin Winchester which has the contract to run the plant, is permitted to sell any excess production to the public. Thus, it is "the source of an estimated 30% of the .223/5.56 sold on the American civilian market". Consequently, we should expect 5.56 ammo to both go up in price and become more scarce.  
• "TFB Review: Glock 17 Gen6 - First 1,000 Rounds"--The Firearm Blog.  The author used the handgun straight out of the box in a two day introduction to practical shooting course:

    The course was a two-day introduction to practical shooting (IPSC basic course, which is mandatory in some countries), designed specifically for beginners. It covered the full spectrum of fundamental skills: basic accuracy drills, static reloads, emergency reloads, strong-hand-only shooting, weak-hand-only shooting, and shooting on the move. Exactly the kind of curriculum that puts a pistol through its paces in ways a static bench test never can. 

    Normally, such a course requires about 400-600 rounds to complete, depending on the maturity of the individual(s). Of the 1,200 rounds fired with this pistol, 900 were fired indoors using GECO's Lead Round Nose Copper-Plated 9mm Luger, 8.0g / 124gr.

    The remaining 300 rounds or so were Hornady Critical Defense FTX 115gr, which we saved for a dedicated accuracy and V0 chronograph session at 25 meters. More on those results in a separate article, but the short version: accuracy was excellent and there were zero malfunctions with the Hornady ammunition.  

• "Review: Assembling an AR-15 Lower Receiver"--American Rifleman. Building a lower receiver for an AR-15 to be chambered in .338 ARC for controlling feral hogs, the author looks at some parts to ensure superior accuracy over the stock mil-spec AR but still be handy in the field. The main parts he discusses are (i) an Aero Precision M4E1 lower receiver, (ii) a Magpul MOE+ grip and DT-PR adjustable stock, (iii) a CMMG lower parts kit but replacing the trigger group with a Wilson Combat TR-TTU Tactical Trigger Unit. The author closes:

Are these parts the best/most expensive/recommended by the guy you know at the range who’s always weighing in? Maybe. Maybe not. I’ve tested them in previous builds and have found them all to perform exactly as advertised/just how I like it, so that’s what I use. That’s not saying that less-expensive options should automatically be discarded; with the exception of the trigger, which is still far from the most expensive one out there, most of the parts chosen for this are decidedly middle-of-the-road but fully functional. 

• "A vz. 61 Skorpion For Less: The Titus Arms TA61"--American Rifleman.  The reason it is less (about $600 or so) is because the company uses an "in-house 3D-printed, carbon-fiber fill nylon lower" which costs less and, as a byproduct, also makes the pistol lighter. However, you can't just use any .32 ACP ammo in this, but need something a bit hotter to ensure reliable function: 7.65 mm Browning (European specification) loads using a 73-grain full-metal jacket bullets velocities of 984 to 1043 fps. "The two loads in this class that the company recommends are available from Fiocchi USA and Sellier & Bellot (S&B). Geco Ammunition also offers a suitable load."
• "Before The Webley"--Guns Magazine. A history of revolver and ammunition developments that led to the development of the Webley revolver. 
• Some more history: "Fudd Friday: The Highs And Lows Of The Winchester Model 1200"--The Firearm Blog.  The Winchester Model 12 was revered as a shotgun because of its hand fitting and high quality. But it was also expensive. The Model 1200 was intended to be less expensive to compete with the Remington 870. 
• "Reloading 6mm ARC for Varmints"--Guns & Ammo. The author is using Hornady 75 GR. V-MAX bullets and, interestingly to me, using 31.5 grains of Hornady LeverEvolution powder. 
• "Colt King Cobra Target .22 LR Review: 3-Inch Model Accuracy & Range Test"--Lucky Gunner. An excerpt:

    The .22 LR version of the Colt King Cobra came out in 2022. This is their one and only rimfire model, but they do offer it in five different barrel lengths. This one is the 3-inch model because, as we’ve already established in our last video, 3-inch revolvers are objectively the best. But if you’re one of the poor unenlightened souls who objected to that comment, you can also have it with a 2-inch, 4.25-inch, 6-inch, or even 8-inch barrel. That’s more barrel length options than any other .22 revolver on the market.

    This is a King Cobra which means it’s built on the beefier magnum version of the Cobra frame. And the “Target” designation means it has an adjustable rear sight and a fiber optic front sight. They’ve also given the .22 model the vent rib cutouts on the barrel, which you do not see on the .357 version. With that and the full underlug, it kind of looks like a junior Python.    

He thought it had the best trigger of any .22 revolver on the market and the accuracy was very good--at 25 yards his 5-shot groups averaged between 1.1 and 1.5 inches depending on the ammo used.  

• "Ruger Super Wrangler Optics Mount By Skinner Sights"--Guns Magazine. It is a Picatinny mount that requires the removal of the front and rear sights, so it stretches from the back of the handgun up to the front of the barrel, so plenty of room for handgun scope.  
• "DIY Long Term Targets"--GAT Daily.  An article on using stable mats to make your own "forever targets". 
• "The Best Ways to Organize Ammo on Your Plate Carrier"--Tactical Gear Blog.  An excerpt:

    Placement determines how naturally and quickly you can access your magazines under stress. For right-handed shooters, your primary magazine pouch should be positioned on the support side furthest to your left, so your support hand can reach it without interfering with your firing grip or rifle position. From there, additional magazines are arranged sequentially toward the centerline. Number your magazines left to right, with Magazine 1 being your first reload source on the support side.

    If you are running both a plate carrier and a battle belt, exhaust your battle belt magazines first before transitioning to the plate carrier. This keeps your heavier, body-mounted load intact longer and reduces fatigue from upper-body weight early in an engagement. On the plate carrier itself, the sequencing reverses: from a battle-belt start, it works inward from the furthest point on the support side, toward the centerline.

    Consistent positioning also means your hands instinctively find the right pouch, even in low light or under cognitive load. A setup you can navigate without looking is one you can rely on in the field. If you are still dialing in your carrier fit before configuring pouches, start with our guide on how to wear a plate carrier. Correct plate height and cummerbund tension are the baseline; everything else is built around. According to U.S. Army doctrine on individual equipment, tactical performance under stress is directly tied to how well trained and predictable a soldier’s equipment layout is.

• For my Idaho readers: "New law limits technology when it comes to hunting big game animals in Idaho"--KIVI News 6. Per the article, from August 30 to December 31 of each year, those hunting birds and big game (other than wolves and mountain lions) will be prohibited from using thermal imaging, night vision, drones, or transmitting trail cameras. However, there is, as always, a de facto exemption for farmers and ranchers as the law doesn't apply to monitoring livestock or private property. Per the article, the law also "eliminated the ban on using technology for retrieving game and monitoring traps". 
• And for background: "Why Trail Cameras Are at the Center of a Heated Debate"--Petersen's Hunting.  
• "Five Common Mistakes People Make When Checking for Ticks"--Life Hacker.  Tips on spotting and getting rid of ticks that you might pick up in the field or even in a park or your backyard. Probably the best advice is to simply take a shower within a short time of getting home--it allows you to more easily spot the ticks and may even wash off ones you miss. 
• "Practical Prepping – Are You Focused on What’s Important?"--The Prepper Journal.  The author has some thoughts on keeping in mind the potential for having to bug out when prepping, including the following bit:

The decisions you make, on a day to day basis, have survival implications.  Perhaps you’ve opted for an under-the-sink water filter, instead of a filtered pitcher.  That’s great for now, but if you have to bug out, you won’t be taking your installed water filter with you.  If you stay in your home, but city water no longer flows, the installed water filter will be of no value to you.  That’s not to say you shouldn’t install a water filter, but if you have to choose between the two, a filtered pitcher is a better choice from a survival standpoint.

• "Prepping 101: Mini-Alcohol Gas Stove"--Tactical Hermit.  
• "U.S. Farmers Are Facing Two Historic Catastrophes At The Same Time In 2026"--SHTF Blog. Those are (i) higher fertilizer prices due to increased oil prices; and (ii) drought because of lower than normal snow fall.
• "FIFO Can Organizer: Best First In, First Out Can Storage Racks"--Modern Survival Blog. This is to help avoid digging around in your cupboard and finding 10 year cans of Ravioli stuck in the back.
• "How to Use Super Glue for First Aid"--Organic Prepper.  

    Super glue is one of the greatest inventions. It will bond almost anything. Army Medics and Navy Corpsman were the first to ever use it in the field,  during the Vietnam War. They glued more patients back together than they sewed. Placing a standard interrupted suture for every stitch you make two new wounds – two new avenues of infection. Super glues eliminated that route of infection.

    You can use super glue when you have a cut. Deep or shallow, it doesn’t matter – you need to protect it from infection. Sealing the wound is your best bet. Why should you worry about a tiny cut? In the SHTF world, more people will die of infection than major trauma. Why? Because no matter how much people like me preach about diet and washing hands, its human nature to find 5000 more important things to do when you’re trying to survive.

The author goes on to provide directions (including photos) and recommendations as to what glue to use and which to avoid.

• Some prepping related e-books: "Index of /pdf/Books/Survival/Self-Reliance/Emergency_Preparedness/".